Hi,
It appears that you have some very specific issues that all relate
to your use of mSQL in your embedded device. This is probably
beyond the scope of this list and more suited to our support
people. Could you please contact our support people via
http://www.hughes.com.au/contact/contact.html
and provide them with complete details of your platform, any
error messages that are produced, and the details of you
commercial mSQL license.
Thanks
Bambi
..
On 02/11/2004, at 4:57 PM, $BM3<iL@(B wrote:
>
> hello:
> i have add the tr command tool to my target system. and the sys-arch
> script excute sucessfully ,and i get the right information in the
> conf/target file. and i also get the setup-configure script file in
> the install dir. but when excute the ./setup-configure sentence in the
> setup file,nothing happened . i have no idea to do . by the way ,can
> you tell me all the other tools i need to excute the setup/build
> successfully.
>
>>
>> Your target system does not have enough tools installed for
>> the setup / build to complete. It says here that it's missing
>> the 'tr' command. No doubt it's some stripped down install
>> for the embedded device. You need to install a reasonable
>> set of "userland" tools.
>>
>> The option might be to run setup on another Linux box
>> and just use the config details it determines on the embedded
>> box. It __might__ work but couldn't promise anything. If
>> you make the embedded box look more like a normal Linux distro
>> then you'll have no problems at all.
>>
>>
>> Bambi
>> ...
>>
>>
>> On 02/11/2004, at 12:23 PM, $BM3<iL@(B wrote:
>>
>>>
>>> first ,thanks for your help. I thought about the nfs read/write
>>> problem last night .
>>> and fixed it .but when i excute the ./setup . i encountered another
>>> problem ,the error information is here:
>>> Starting configuration of mSQL 3.
>>>
>>> scripts/sys-arch: 3: tr: not found
>>> scripts/sys-arch: 4: tr: not found
>>> scripts/sys-arch: 5: tr: not found
>>>
>>>
>>> You don't appear to have the uname command anywhere.
>>> Please describe your system (eg. SunOS-4.1-sparc)
>>> so ,i enter some information like linux-2.4.19-rmk7 enter
>>> just gets some space line.no more continue.
>>> my god, i am not good at the setup script programing. it is so
>>> difficult for me to
>>> change it for my target system.
>>> eager for your reply!!!!
>>> thanks!!!
>>>>
>>>>
>>>> I think the problem here is pretty clear and obvious.
>>>>
>>>> --
>>>> Starting configuration of mSQL 3.
>>>>
>>>> ./setup: 27: cannot create conf/target: Permission denied
>>>> cp: unable to open `setup-configure': Permission denied
>>>> --
>>>>
>>>> You ran the configure script as a user who can't write to
>>>> the local filesystem (or it's aread only filesystem or
>>>> something).
>>>>
>>>>
>>>> Bambi
>>>> ...
>>>>
>>>>
>>>> On 01/11/2004, at 8:44 PM, ysmsun wrote:
>>>>
>>>>> hello:
>>>>> i have sucessfully intall the msq on my montavista embedded
>>>>> linux target system. but i meet some compiling problem when i
>>>>> install
>>>>> it on my arm linux target system .
>>>>> here is my operation: start the kernel , set up the ramdisk
>>>>> ,then mount the host pc file system. finally ,i install it on my
>>>>> target system. i used the same way just like i did on my montavista
>>>>> embedded linux target system . here is the error information:
>>>>> cd /mnt/home/ARM/develop/msql-3.5
>>>>> ./setup
>>>>> Starting configuration of mSQL 3.
>>>>>
>>>>> ./setup: 27: cannot create conf/target: Permission denied
>>>>> cp: unable to open `setup-configure': Permission denied
>>>>> ./setup: 31: ./setup-configure: not found
>>>>>
>>>>> Using cc for testing
>>>>> checking your directory stuff.
>>>>>
>>>>> Hang on! Could't work out your directory routines
>>>>> Check out conf/dirent.c and see what you need defined
>>>>> to make it compile. When you've worked that out,
>>>>> rerun this script and enter the details at the prompt
>>>>> offered below (e.g. -DHAVE_DIRENT -DHAVE_DIRENT_H) :-
>>>>>
>>>>> Defines for directory stuff?
>>>>> checking your mmap(). You don't have mmap()
>>>>>
>>>>> mSQL 3 needs a working mmap(), it cannot work without it.
>>>>> You cannot run mSQL 3 on this machine. Sorry.
>>>>> what.s wrong ? maybe the setup script can not find the gcc in the
>>>>> system dir.
>>>>> another thing , if i want to use the cross-compling , how should i
>>>>> do?
>>>>> i see this sentence in the site.mm :checking whether we are cross
>>>>> compiling... no
>>>>> so ,i think there must be a way to use the cross-compiling gcc?
>>>>
>>
-----------------------------------------------------------------
This is the Mini SQL Mailing List operated by Hughes Technologies
To unsubscribe, go to http://www.Hughes.com.au/extras/email/
This archive was generated by hypermail 2b30 : Wed Dec 01 2004 - 00:20:01 PST